Hybrid Full length

Hybrid rack composed of 670mm Corner-Pillars, two Hybrid Shelf-Kits and a dedicated Hybrid TT-Shelf on top

Technical details:

• Hybrid standard full length with 2 shelf-kit with top shelf
• Feet: Floor protectors
• Total distance available in-between the shelves:  570mm
• Total Rack height: 720mm
• Load limitations top shelf: 60 kg
• Load limitation middle shelves: 70kg

The picture shows a Hybrid rack composed of 900mm Corner-Pillars, three Hybrid Isolation Shelf-Kits and a dedicated Hybrid TT-Shelf on top, supported by the unsurpassed Hybrid Isolation System. The rack also has three integrated cable carriers. Technical details:

• Hybrid standard with 3 isolation shelf-kit (max 45kg) and one isolated top shelf and 3 Cable Carriers
• Feet: Feet of Concrete
• Total distance available in-between the shelves:  670mm
• Total Rack height: 980mm
• Load limitations top shelf: 60 kg
• Load limitation middle shelves: 45kg

For you who prefer ultra rigid solutions we can offer Hybrid with 670 mm corner pillars in a the Hybrid full length solutions.

The picture shows a Hybrid rack composed of 900mm Corner-Pillars, three Hybrid-Shelf-Kits and a dedicated Hybrid TT-Shelf on top, supported by the unsurpassed Hybrid Isolation System. The total available space between the three shelf trays is 680 mm. If one more shelf would be added the total available space would be reduced to 615mm. Of course the total space can freely be appropriated when the shelves are infinitely adjustable along the corner-pillar length.

Hybrid integrated isolation system is mounted on top of the Hybrid corner pillars in order to decouple from any undesired vibrations. The isolators are available in 2 versions, for 8-60kg load and for 8-180kg load.

Hybrid Top Isolators measurement performance

The Hybrid Isolation shelf has an inbuilt unsurpassed isolation system that isolate each level from each other as well as from the floor.
Hybrid Isolation shelf isolate the equipment from vibration using two shelves with a mechanical suspension system in-between.
The advantage of the Hybrid Isolation Shelf is that each module will be individually isolated and the rack will keep its stability.

The Hybrid Isolation Shelf comes with a spring system that contains as many as 28 springs in total and can bear a maximum weight of 46kg. Customers can easily adjust the amount of springs in order to optimize the isolation and adapt to the equipment weight. Below is a measurement analysis of the shelf that shows the damping efficiency.

The Isolation shelves can be used in both Hybrid standard, Hybrid Full Length as well as Hybrid Wood system.

The bottom shelf is available in the following configurations:

• Bottom shelf: black and white
• The top shelf: black, white, walnut, cherry, oak and black oak
• Extrusions: black and silver

Measurement performance

The mounting of the Hybrid Isolation Shelf-kit

https://youtu.be/fbfvsjMpySA

The Hybrid Isolation shelf-kit HD has an inbuilt unsurpassed isolation system that isolates each level from each other as well as from the floor.
Hybrid Isolation shelf-kit HD isolates the equipment from vibration using two shelves with a mechanical suspension system in-between.
The advantage is that each module will be individually isolated and the rack will keep its stability.

The HD variant is made to withstand even higher loads than the isolation shelf-kit. The integrated isolation system in the Isolation shelf-kit HD is even more efficient as it is based on tension spring compared to compression spring used in the Isolation shelf-kit.

The Hybrid Isolation Shelf-kit HD comes with a spring system that contains as many as 48 springs in total and can bear a maximum load of 90kg (24 springs) or 180kg (48 springs). It is easy to adjust the amount of springs in order to optimize the isolation efficiency.

The Isolation shelf-kit HD can be used in both Hybrid standard, Hybrid Full Length as well as Hybrid Wood.

Size of the shelf is 435mm x 495mm x 60-70mm.

The Isolation shelves can be used in both Hybrid standard, Hybrid Full Length as well as Hybrid Wood.

The bottom shelf is available in the following configurations:

• Bottom shelf: black and white
• The top shelf: black, white, walnut, cherry, oak, black oak and concrete
• Extrusions: black and silver

Measurement performance in 50Hz

The mounting of Isolation shelf-kit HD

https://youtu.be/2RCOh3GCwhk

Floor protectors in silver anodized aluminium

Floor protectors in black anodized aluminium

The hybrid 180 mm sideboard is a perfect compliment to the Hybrid rack. The multi usage purpose of the sideboard are for example: holder of RIA amp, CDs, remote controls, etc... The sideboard can be on either side of the rack and fully adjustable in height just like the normal Hybrid shelfs are. The sideboard is available in black, white and veneers in oak, black oak, walnut and cherry. The sideboard can be combined with any extrusion colour.

Hybrid top table is available in black and white MDF or veneered sandwich board.

Black and white painted board

Texture painted MDF with Spirit Level for easy leveling. Size is 695 x 520 x 22mm and weight is 6 kg. When only supported in the corners max recommended load is 60kg. However if the Hybrid’s top most shelf is raised and supports are placed between the Hybrid shelf and Top Table Shelf the load can be 125kg.

Veneered sandwich board

The Veneered sandwich board is available in oak, black oak, cherry and walnut. To the new Hybrid Wood corner pillars is also new turntable developed. These new turntables are made of a sandwich board that have been veneered in black oak, oak, walnut and cherry. The sandwich board consists of 4 layers:

• Layer 1: thin sheet of cork on the top to avoid any potential ringing in the table
• Layer 2: MDF
• Layer 3: Porous damp layer that will absorb and remove resonance in the table
• Layer 4: MDF

The board has been tested by letting a 9,8g steel ball be dropped 50 cm above the sandwich board and compared with a standard MDF board. The result is described in below table:

Test object	Peak value (dB)	Peak average over 3 seconds (dB)
Sandwich board	109,7 dB	73,9 dB
Standard MDF board	119,9 dB	87,1 dB

From the result one can read that the sandwich board basically damp with 10-13dB compared to a standard MDF board. The large top tables have a limitation of load as it is placed on top of the corner pillars of the Rack of Silence. The maximum load is 50kg. If further load is required it is recommended to place the uppermost rack shelf just beneath it and use the apparatus support to assist the support of the table. In this way the maximum load can be increased to 160kg.

Cable Carrier for Hybrid standard racks. Available in black and silver. NOTE:

• Cable Carriers cannot be combined with sideboard.
• Using Cable Carriers unable the possibility to build a Hybrid rack rack side by side.

https://youtu.be/fbfvsjMpySA

Hybrid corner pillars are sold in pairs and available in many alternatives. To estimate the height needed you need to consider that the extruded console is possible to move along the full corner pillar height.

• Aluminum color: Black and silver
• Top and bottom color: Black and white
• Standard length: 200, 275, 350, 670 and 900 mm
• Custom lengths

The \"Cable Clamp\" for Hybrid and Rack of Silence will organaize and hide any cable very efficiently behind the posts of the rack.

No need to dismantle anything, just push in a screw feedthrough in the track on the Hybrid or Rack of Silence corner pillars and then add the clamp and fix it with a screw.
The Clamp is made of soft steel and can hold any cable up to 35mm in diameter.
See instruction movie here:

https://www.solid-tech.net/instruction-videos/

In each package of Cable Clamp are 5 pcs of cable clamps included.

Hybrid Duo top table is available in black and white. Size is 1310 x 516 x 22mm and weight is 13,5 kg. Max recommended load is 120kg evenly distributed over the table.  

Shelves for the Hybrid series are available in:

• Black painted MDF
• White painted MDF
• Cherry veneer
• Walnut veneer
• Oak veneer
• Black Oak veneer
• Carbon hydro dipped
• Concrete

The veneer is of the same high quality as in the Radius rack system. With the veneered, concrete and Carbon shelves the console is attached from the bottom meaning that there will be no visible screw heads. The black and white painted MDF shelves are attached from above. Measures: 490x435, 19mm  Concrete: 22mm thickness  

Silver anodized pillar with white top and bottom

Silver anodized pillar with black top and bottom

Black anodized pillar with white top and bottom

Black anodized pillar with black top and bottom

The Hybrid rack offers 2 anodizing color options.

• Silver
• Black

Measurements of the Hybrid rack series

The block design does not only offfer endless flexibility but also ensures effective isolation between every shelf for enhanced performance. Externally as well as internally born resonances and vibrations are effectively reduced by the felt-padded isolation disc made from brass which create the necessary joint which stops the expansion of unwanted movements (resonances/vibrations)

Hybrid Extrusion available in black and silver anodized aluminium.

Download

[pdf-embedder url=\"https://www.solid-tech.net/wp-content/uploads/2021/07/Cable-carrier-mount-inst-rev1.pdf\" title=\"Cable carrier mount inst rev1\"]