Description
Top Table Large for the Hybrid standard and Hybrid Wood
Available in black and white painted MDF or veneered Sandwich board.
Integrated flush mounted Spirit Level.
Allows for placement of a turntable with separate motor and plinth.
The painted MDF board dimension is 695 x 520 x 22mm and weight is 6 kg.
The veneered sandwich board consists of 4 layers:
- Layer 1: thin sheet of cork on the top to avoid any potential ringing in the table
- Layer 2: MDF
- Layer 3: Porous damp layer that will absorb and remove resonance in the table
- Layer 4: MDF
The Sandwich table in veneer has a thickness of 24mm width of 527mm and a length of 705mm. The board has been tested by letting a 9,8g steel ball be dropped 50 cm above the sandwich board and compared with a standard MDF board. The result is described in below table:
| Test object | Peak value (dB) | Peak average over 3 seconds (dB) |
| Sandwich board | 109,7 dB | 73,9 dB |
| Standard MDF board | 119,9 dB | 87,1 dB |
From the result one can read that the sandwich board basically damp with 10-13dB compared to a standard MDF board.
Max load:
Impact point / pressure point (legs on the component) at the outer edge of the shelf: 200kg
Impact point / pressure point (legs on the component) e.g. 10cm in towards the centre: 100kg
Impact point / pressure point (legs on the component) e.g. 20cm in towards the centre: 60kg
Impact point / pressure point (legs on the component) e.g. 30cm in towards the middle: 50kg
If further load is required it is recommended to place the uppermost rack shelf just beneath the top shelf and use it to assist the support of the top table. In this way the maximum load can be increased to 160kg.
