Hybrid Wood is a rack series within the Hybrid rack series. The aluminum corner pillars are dressed in solid wood both on the front and on the side to give a more warm and home friendly touch. The solid wood part is available in black oak, cherry, oak and walnut of highest possible quality. These new pillars are best fitted with the veneered shelves or concrete shelves that are the same as the shelves in the standard Hybrid rack series, both with and without integrated isolation system.
The pillars can be ordered with or without integrated isolation system. The isolation is based mechanical suspension system that very efficient cancel all non desired vibration that origin from the floor or from the equipment itself. In Hybrid Wood the isolation system is hidden in the pillar in order to be as discrete as possible.
The pillars come in package of two with one left and one right mounted side wooden part.
Standard pillar lengths are 200, 275, 350 and 670mm. To the Hybrid Wood is also available turntable top shelf. The turntables are made of a sandwich board available in black oak, oak, walnut and cherry. To the rack can be equipped a sideboard also available in black oak cherry, oak and walnut.
Click here to read all about Hybrid
Hybrid Wood Product Portfolio
Hybrid Wood Turntable Shelf
To the new Hybrid Wood corner pillars is also new turntable developed. These new turntables are made of a sandwich board that have been veneered in black oak, oak, walnut and cherry. The sandwich board consists of 4 layers:
The top table Shelf has a thickness of 24mm width of 527mm and a length of 705mm.
The board has been tested by letting a 9,8g steel ball be dropped 50 cm above the sandwich board and compared with a standard MDF board. The result is described in below table:
From the result one can read that the sandwich board basically damp with 10-13dB compared to a standard MDF board. The large top tables have a limitation of load as it is placed on top of the corner pillars of the Rack of Silence. The maximum load is 50kg. If further load is required it is recommended to place the uppermost rack shelf just beneath it and use the apparatus support to assist the support of the table. In this way the maximum load can be increased to 160kg. |