Feet

The noise and vibration originated from the floor results in an audible reduction of the sound quality. The brand-new Feet of Concrete with inbuilt isolation are designed to absorb and decouple the rack and the very sensitive equipment from both static electricity as well as vibrations. The feet are built in 6 layers to optimize the isolation capability.

• Layer 1: Brass insert where the rack spike is located to remove any non-desired resonance.
• Layer 2: Concrete top to increase the weight and isolate from static electricity that arise from floor and carpets.
• Layer 3: Rubber O-ring that aims to absorb vibrations and thus isolate the rack from vibrations in the floor.
• Layer 4: Hollow aluminum spacer that can come in either black or silver
• Layer 5: Steel sand that will absorb the low-level frequencies when transforming vibration to heat. The steel also adds weight to make the foot more stable.
• Layer 6: Cork sheet to protect the floor as well as absorb vibrations.

The Feet of Concrete is available in 4 and 6 pack and in silver or black anodized aluminum and has a size of D70xH28mm. Load limitation is max 50kg per foot or 200kg for 4 feet. The design will enhance the racks and give a sense of handcraftsmanship by being built in various materials. The concrete top gives a modern look that works nicely with all Solid Tech models and colors variants.

Aluminum floor protector is engineered and designed in order to protects your floor but also reduce the amount of vibrational energy going into the rack.

In order to satisfy each client wish and desire is Solid Tech now introducing the Spike Fixed Floor Protector. Using spike is always necessary as it is well known that it increases the sound quality extensively. However standard floor protectors may scratch the floor if the rack/loudspeaker stand is accidentally moved out of place. The new floor protector has a stainless spike integrated and incapsulated in the aluminum cover in order stay fixed to the floor protector if the rack is moved. Beneath the spike is located a brass spacer that aim to avoid any non-desired resonance or ringing. In the bottom of the floor protector is attached a sheet of cork to damp and protect the floor from the hard metal. The measures are D50xH45mm and the thread is available both in M8 or M6. The foot will build 26-40mm (added height between end of pillar to the floor). Note: M6 is mainly for non Solid Tech audio equipments/speaker stand. Solid Tech always uses M8 thread.