Discs of Silence

The Discs of Silence the world’s second best passive isolator?
88,48% reduction at 20Hz!

The Discs of Silence is our workhorse isolator as in its Heavy- Duty version can effectively isolate up to 175kg (385lbs) per set of four discs.
When we developed the Discs of Silence was our goal to create the most efficient and load capable isolator as possible without taking too much height in claims. It would also be height -adjustable and be adaptable to uneven loads.

The Discs of Silence isolation-system consists of a cylindrically formed, sturdy and anodised Aluminum base, extension-springs, center-hub and a height-adjustable center-screw with a damping layer for mechanical coupling to the component.
The Discs of Silence are available in 3 or 4pack.

The equally simple as ingenious horizontal location of the extension-springs allows a large capacity without taking as much height in claims. When correctly loaded the operating height is 32-35mm. Correctly adapted and loaded is the resonance frequency well below 4Hz. Ensuring isolation even in the lowest and most degrading frequencies, resulting in much higher fidelity without tonal highlighting and masking such as more dynamic, cleaner transient response, wider and deeper soundstage, increased low level information, tighter bass and silkier highs.

Optimized adaptation to a specific weight of each disc is obtained by adding the right number of springs, as well as the height adjustment of the center-screw.
Each disc can be configured with two, three, four or six springs depending of the amount of load. In the case of supply are three springs mounted and included and then the system can be loaded with max 45 kg when the center screw is adjusted to its top position. Additional spring-set can be obtained and then doubled the capacity to 90 kg per set of four discs. In the case of supply of the HD version are twelve springs per disc included but only six mounted. See below for configuration.

Optimal load table

Optimal pressure on each isloator is at least in-between max and min but preferably as close as possible to max load according to the table below.

Discs of Silence weight scheme:

Pure technology – No voodoo. The proof, 88,48% reduction at 20Hz. Have you ever seen an independently conducted vibration measurement from any other audio-isolator manufacturer?

30kg loaded on 4 isolators with 3 springs per isolator.
Peak improvement with isolation: 86%
Vibration source is situated below the isolated object and the sensor is situated above the object with a shelf in-between.

Downloads

VIBRATION MEASUREMENT & ANALYSIS

Disc Of Silence Product Portfolio

Discs of Silence 4 pack

Discs of Silence 4/pack

 

Max load-capacity approx. 45kg (99lbs)

Optimum operating range, 20-45kg (44-99lbs)

Additional spring set increase the maximum load-capacity to approx 90kg (198lbs) and then the optimum operating range is increased to 40-90kg (88-198lbs)