Balance is developed to color the sound as little as possible. The great stability is achieved by using thick high-density shelves and corner posts that can be filled with sand.
Balance is the winner in the Accessory HIFI category in the famous HIFI+ magazine. Read the full review here:
The shelves are 22mm thick with a very high load capacity. The shelves are available with or without built-in isolation. The isolation system effectively decouples the equipment from external or internal vibrations.
Balance stand is based on the same corner post as our Radius stand and offers the same scalability, which means you can build the stand both horizontally and vertically with the four well-chosen post lengths, namely 65.5; 150; 234.5 and 319 mm.
Balance with its retracted corner pillars are designed to primarily give as much highlight to the equipment as possible. The shelves are made of waxed oak to preserve the natural wooden feel and corner posts in black or silver anodized aluminum
Four shelf color variants are available:
1. Silk oak 2. White oak 3. Black oak 4. Tobacco oak
Balance Product Portfolio
Balance
W695, D516, H81032mm.
Shelf distance 147, 147, 231, 316mm.
Max load100kg/shelf.
Width between corner pillars 533mm
W695, D516, H866mm.
Shelf distance 147, 231, 316mm.
Max load100kg/shelf.
Width between corner pillars 533mm
W695, D516, H531mm. Shelf distance 147, 231mm. Max load100kg/shelf. Width between corner pillars 533mm
W695, D516, H453mm. Shelf distance 316mm. Max load100kg/shelf. Width between corner pillars 533mm
W695, D516, H1062mm.
Shelf distance 117, 117, 201, 286mm.
Max load 45kg (HD springs increase max load to 100kg)
W695, D516, H866mm.
Shelf distance 117, 201, 286mm.
Max load 45kg (HD springs increase max load to 100kg)
W695, D516, H561mm. Shelf distance 117, 201mm. Max load 45kg (HD springs increase max load to 100kg)
| W695, D516, H483mm. Shelf distance 286mm. Max load 45kg (HD springs increase max load to 100kg) |
| Mono Amp Stand, W695, D516, H145mm, Max load 45kg (HD springs increase max load to 100kg) |
W1300, D516, H531mm.
Shelf distance 231mm and 147mm
Max load 45kg (HD springs increase max load to 100kg)
W1300, D516, H453mm.
Shelf distance 316mm.
Max load100kg/shelf.
Width between corner pillars 533mm
W1300, D516, H561mm.
Shelf distance 117, 201mm.
Max load 45kg (HD springs increase max load to 100kg)
| W1300, D516, H483mm. Shelf distance 286mm. Max load 45kg (HD springs increase max load to 100kg) |
Balance Double shelves have a width of 695mm. Two standad size equipment can be supported on each shelf. The shelf has an efficient integrated isolation system in-built. The shelf is veneered in oak and available in three colors, black oak, white oak, Tobacco oak and silk oak.
Read more here why isolation is important:
Balance Single shelves have a width of 695mm. The shelf has an efficient integrated isolation system in-built. The shelf is veneered in oak and available in three colors, black oak, white oak and silk oak.
Read more here why isolation is important:
Balance Single shelves have a width of 695mm. Top shelves are equipped with a bubble level. The shelf is veneered in oak and available in three colors, black oak, white oak and silk oak.
Balance Basic Double shelves have a width of 1300mm. Two standard size equipments can be supported on each shelf. The shelf is veneered in oak and available in three colors, black oak, white oak, Tobacco oak and silk oak.
Balance shelves are available in four different colors in the oak veneer. White oak, Black oak, Tobacco oak and silk Oak. The Shelves are stained and waxed in order to emphasize the wood feel.
- Layer 1: Brass insert where the rack spike is located to remove any non-desired resonance.
- Layer 2: Concrete top to increase the weight and isolate from static electricity that arise from floor and carpets.
- Layer 3: Rubber O-ring that aims to absorb vibrations and thus isolate the rack from vibrations in the floor.
- Layer 4: Hollow aluminum spacer that can come in either black or silver
- Layer 5: Steel sand that will absorb the low-level frequencies when transforming vibration to heat. The steel also adds weight to make the foot more stable.
- Layer 6: Cork sheet to protect the floor as well as absorb vibrations.
The corner-pillars are made from the finest Swedish Aluminum extrusion and beatifully anodized in either deep black or satin silver finish.
The choice of Aluminum and extensive internal bracing provides for a very favorable weight/stiffness ratio and a non ringing design.
Four well chosen lengths constitute standard range, namely 65,5, 150, 234,5 and 319mm.
Are you in the need for a different mix of corner-pillars in your rack kit? No problems at all! If the actual design allows for an exchange we can tailor made to your needs and wishes. If that were still not good enough, we are making custom lengths between 30-650mm.
The Balance isolation system consist of four isolation units that has been integrated in the bottom and top of a shelf. Each units consist of seven removable springs. A user can maximize his isolation shelf performance by removing the amount of springs in order to optimize the vibration isolation for the equipment pending the weight and its distribution over the top shelf surface in order for the equipment to be perfectly leveled. With all seven springs mounted the shelf can uphold a weight of 45kg. If further weight is needed to supported heavy equipments is an HD (High Density) spring available as an accessory and then if all seven springs are exchange on all four units (28 springs), the isolation shelf can uphold as much as 100kg. On all Balance isolation shelves is a bubble level integrated to make it easy for the user to keep his system leveled.
Read more here about the principles why you will improve sound quality by isolating each equipment independently from internal and external low frequency vibrations:
Balance corner pillars can be filled with sand to improve performance
Balance comes with a set of top shelf discs, these discs have the same color as the selected corner pillars.